Transport

Twice clustering based hybrid model for short-term passenger flow forecasting

2024-12-09T12:37:14+02:00

Short-term metro passenger flow prediction plays a great role in traffic planning and management, and it is an important prerequisite for achieving intelligent transportation. So, a novel hybrid Support Vector Regression (SVR) model based on Twice Clustering (TC) is proposed for short-term metro passenger flow prediction. The training sets and test sets are generated by TC with respect to values of passenger flow in different time periods to improve the prediction accuracy. Furthermore, each obtained cluster is decomposed by using the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) algorithm and the Ensemble Empirical Mode Decomposition (EEMD) algorithm, respectively. The volatility of each component obtained after decomposition is further reduced. Then, the SVR model optimized by the Grey Wolf Optimization (GWO) algorithm is used to predict the decomposed components. Moreover, forecast based on one-month data from Xi’an Metro Line 2 Library Station (China). By comparing the prediction results of the TC condition, the Once Clustering (OC) condition and the non-clustering condition, it shows that the TC approach can adequately model the volatility and effectively improve the prediction accuracy. At the same time, experimental results show that the novel hybrid TC–CEEMDAN–GWO–SVR model has superior performance than Genetic Algorithm (GA) optimized SVR (SVR–GA) model and hybrid Back Propagation Neural Network (BPNN) model.

Starting driving style recognition of electric city bus based on deep learning and CAN data

2024-12-10T18:29:30+02:00

Drivers with aggressive driving style driving electric city buses with rapid response and high acceleration performance characteristics are more prone to have traffic accidents in the starting stage. It is of great importance to accurately identify the drivers with aggressive driving style for preventing traffic accidents of city buses. In this article, a starting driving style recognition method of electric city bus is firstly proposed based on deep learning with in-vehicle Controller Area Network (CAN) bus data. The proposed model can automatically extract the deep spatiotemporal features of multi-channel time series data and achieve end-to-end data processing with higher accuracy and generalization ability. The sample data set of driving style is established by pre-processing the collected in-vehicle CAN bus data including the status of driving and vehicle motion, the data pre-processing method includes data cleaning, normalization and sample segmentation. Data set is labelled with subjective evaluation method. The starting driving style recognition method based on Convolutional Neural Network (CNN) model is constructed. Multiple sets of convolutional layers and pooling layers are used to automatically extract the spatiotemporal characteristics of starting driving style hidden in the data such as velocity and pedal position etc. The fully connected neural network and incentive function Softmax are applied to establish the relationship mapping between driving data characteristics and the starting driving styles, which are categorized as cautious, normal and aggressive. The results show that the proposed model can accurately recognize the starting driving style of electric city bus drivers with an accuracy of 98.3%. In addition, the impact of different model structures on model performance such as accuracy and F1 scores was discussed, and the performance of the proposed model was also compared with Support Vector Machine (SVM) and random forest model. The method can be used to accurately identify drivers with aggressive starting driving style and provide references for driver’s safety education, so as to prevent accidents at the starting stage of electric city bus and reduce crash accidents.

Optimal integrated location and dispatching decisions for feeder bus route design problem

2024-12-18T13:40:39+02:00

Dispatch centres are an important part of the feeder bus network, and their location affects the design process of the feeder route. In some remote areas with weak transport infrastructure, it is very important to find an effective tool to simultaneously select the optimal location of the dispatch centre as well as transit routing process, which could improve the performance of the feeder bus system. The purpose of this article is to present an integrated optimization model for joint location and dispatching decisions for Feeder Bus Route Design (FBRD). The proposed methodology can select a number of best dispatch centres in alternative sets and calculate the order of the demand points visited by the feeder route. The objective of the model is to simultaneously minimize the total construction cost of selected dispatch centres and the total operational cost of the designed feeder bus system. The methodology facilitates obtaining solutions using the design of an improved double population Bacterial Foraging Optimization (BFO) algorithm. For example, it redefines the solution coding and the heuristic used to randomly initialize the initial population. When applied to the design of a feeder bus system for a station at Nanjing (China), the results reveal that a reduced budget may lead to change in the location of the dispatch centre; a more distant centre is required, which may increase the total mileage cost of all feeder routes. A detailed comparison of the improved and standard BFO and CPLEX shows that the difference between solutions is acceptable. However, the calculation time is greatly reduced, thus proving the effectiveness of the proposed algorithm.

Funiculars in Lithuania: from the fruit basket to Gediminas Hill

2024-12-18T18:29:42+02:00

Technological advances in transport of the 20th century include aeroplanes, human spaceflight and Moon landings, submarines, and magnetic levitation trains. In the fast-paced world of technology, the achievements of previous centuries are often forgotten. One of the examples of human ingenuity is the funicular railway. Its technology has hardly changed over the years. Using a simple pulley system, passengers and freight are still lifted steep slopes with minimal energy consumption. This demonstrates the lasting value of simple solutions and engineering intelligence. The article discusses the world’s funiculars and their design characteristics. A correlation analysis for the number of funiculars per country (N) and the country mountainousness index (M) has been carried out. 3 types of regression models have been developed and their determination and correlation coefficients have been calculated. The highest correlation coefficient values are for quadratic and linear mathematical models. The critical values of the correlation coefficients were calculated and compared with the correlation coefficients obtained from the study. For all 36 countries, the correlation coefficient for N and M variables is above the critical value only when a quadratic regression model is used. The correlation coefficients for all models are above the critical value for the 15 economically advanced and tourism-developing countries. The study shows that the number of cable cars in economically developed countries is more strongly correlated with the degree of mountainousness of the country in question.

Multi-criteria decision-making for solving transport sustainability issues: an overview

2024-12-18T18:29:41+02:00

With the recognition of the impact of the transport sector on climate change and human health, decision-makers are under the pressure to shape the transport sector in a more sustainable way, considering more sustainable options and technologies. Besides that, it is also important to ensure such aspects as affordability, security, reliability and convenience of transport services and the effective functioning of the whole system. Therefore, transport-related policy actions require not only an economic point of view, but also environmental and social actions. The article aims to overview the application of Multi-Criteria Decision-Making (MCDM) techniques for solving sustainability issues in the transport sector and to provide the main insights for methods and sustainability criteria selection. The Search, Appraisal, Synthesis and Analysis (SALSA) framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement were applied as the basis for the research. The detailed content analysis of studies is arranged according to the application areas and the methods applied. In order to increase the applicability of the performed analysis and to simplify the decision-making for further studies, the thematic areas for criteria selection are proposed, the most popular MCDM techniques alongside their advantages and disadvantages are briefly discussed.