Department of Civil Engineering, The University of Hong Kong, Pokfulam, Hong Kong, China; Faculty of Civil Engineering, Vilnius Gediminas Technical University, Saulėtekio al. 11, LT-10223 Vilnius, Lithuania
Full range analysis of reinforced concrete (RC) members covering the post-crack and post-peak regimes is important for obtaining the deformation response and failure mode of structural members. When a RC member is subject to an increasing external load, the critical sections would exhibit cracking and/or softening. Due to stress relief effect in the proximity of crack opening and plastic hinging, unloading may occur at the adjacent regions. The variable stress states of discrete sections would lead to sectional variation of stiffness, which could not be accounted for by conventional structural analysis methods. In this paper, a nonlinear multilevel analysis method for RC frames whereby the frame members are divided into sub-elements and sectional analysis is utilised to evaluate stiffness degradation and strength deterioration is developed. At sectional level, the secant stiffness is determined from moment-curvature relation, where the curvature is evaluated based on both transverse displacements and section rotations of the frame member. Unloading and reloading behaviour of concrete and reinforcing steel is simulated. In implementing the multilevel analysis, secant iteration is performed in each step of displacement increment to obtain the convergent solution satisfying equilibrium. Numerical example of RC frame is presented to demonstrate the applicability and accuracy of the proposed nonlinear multilevel analysis method.
Ng, P. L., Lam, J. Y. K., & Kwan, A. K. H. (2016). Nonlinear multilevel analysis of reinforced concrete frames. Engineering Structures and Technologies, 7(4), 168-176. https://doi.org/10.3846/2029882X.2016.1150793
Authors who publish with this journal agree to the following terms
that this article contains no violation of any existing copyright or other third party right or any material of a libelous, confidential, or otherwise unlawful nature, and that I will indemnify and keep indemnified the Editor and THE PUBLISHER against all claims and expenses (including legal costs and expenses) arising from any breach of this warranty and the other warranties on my behalf in this agreement;
that I have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the article of which I am not the copyright owner.
on behalf of any co-authors, I agree to this work being published in Engineering Structures and Technologies as Open Access, and licenced under a Creative Commons Licence, 4.0 https://creativecommons.org/licenses/by/4.0/legalcode. This licence allows for the fullest distribution and re-use of the work for the benefit of scholarly information.
For authors that are not copyright owners in the work (for example government employees), please contact VILNIUS TECHto make alternative agreements.
